We deliver the transfer ready to work

Misati makes the mechanical, pneumatic and electrical assembly of the transfer and determines the three-dimensional position of the pincers.

We have our own bench, especially designed to assemble transfers, and a positioning robot, which helps to reduce the number of working hours and guarantess the highest precision.

Request a quote

https://misati.com/source/bench-robot-assembly-transfers

Adjustment of a transfer

How to adjust the holding force of the pincers?

It is very important that all the screws of a pincer exert the same force on the sheet so as not to cause it to slide.

It is recommended to use the torque screwdriver for adjusting the pincers.

Putting a transfer into operation with Master Sheets: 30 minutes

Thanks to the system of Master Sheets conceived by Misati, putting a lightweight transfer into operation becomes simpler and can get reduced to 30 minutes. Savings for the stamping company in the initial investment and downtime of the press.

Master Sheets are a set of stamped sheets of all the operations of the transfer. They have been marked with the exact position where gripper fingers fasten the metal sheet.

They are also useful in case of collision as the geometry of the pincers can be checked and readjusted quickly.

Mastersheet: Description & Uses

Technical assistance

An experienced Misati technician is also available to assist you:

Supervision during the set-up of your transfer.
Training to the operator in order to increase the production of the transfer, die and press.
If requested, the cyclogram of the press and its theoretical maximum production.
Study and report of any possible production improvements.

https://misati.com/source/Adjustment of a transfer

Self-assembly savings

If you provide us with the layout of your sheet and the 3D of the die, Misati will supply simple instructions for assembling your transfer:

Study of the transfer, assembly drawings, videos of assembly and set-up.
Analysis of collisions, verification of potential interferencies of the transfer with the die to guarantee the reliability.

Proposals for improving the dies in order to increase the productivity of the transfer, if possible.
Calculation of "spm" of the Press-Die-Sheet-Transfer set ensuring the feasibility of the system.

We deliver the transfer ready to work

Adjustment of a transfer

How to adjust the holding force of the pincers?

Putting a transfer into operation with Master Sheets: 30 minutes

Technical assistance

Self-assembly savings

Subscribe to our newsletter

Thank you for subscribing to our newsletter

Telephone Support

Thank you for your interest. We will call you back as soon as possible.

Cookies settings